NICEIC Part P Regestered Electricians

TAS Electrical & Security Holmgate NICEIC Part P Regestered Electricians
Pat Testing Company Holmgate
HOME | INFORMATION

PAT Testing Company Holmgate
PAT Testing Company TAS Electrical & Security provide maintenance, servicing and repairs. PAT Testing services including :
All kinds of PAT Testing : Domestic, Commercial and Industrial.
All Reports & Certification.
Manchester

For a prompt personal service or just advice please phone Thomas/ on 07830655771 Thank you

Our Areas of Operation
Manchester,

 

TAS pat testing company

07830655771

07830655771

email

Fire Alarm Shop

SHOP

Buy all your fire alarm Equipment from TAS

 

PAT Testing Company

PAT Testing Manchester
Domestic PAT Testing Commercial PAT Testing Industrial PAT Testing HMO Houses in Multiple Occupancy PAT Testing Certificates & Test Reports for PAT Testing References

DOMESTIC

COMMERIAL

INDUSTRIAL

HMO

REPORTS & TEST INSPECTIONS

REFERENCES

Installation

Maintenance

Reports & Test Inspections

Repairs & Servicing

Installation

Maintenance

Reports & Test Inspections

Repairs & Servicing

 

Installation

Maintenance

Reports & Test Inspections

Repairs & Servicing

Landlords Inspection

PAT Testing

Repairs & Servicing

Domestic

HMO Specialists

Industrial

Commercial

Domestic

HMO Specialists

Industrial

Commercial

Phone 07830655771 Mobile 07830655771

PAT Testing

Legal Requirements

The legislation of specific relevance to electrical maintenance is the Health & Safety at Work Act 1974, the Management of Health & Safety at Work Regulations 1999, the Electricity at Work Regulations 1989, the Workplace (Health, Safety and Welfare) Regulations 1992 and the Provision and Use of Work Equipment Regulations 1998.

The Health & Safety at Work Act 1974 puts the duty of care upon both the employer and the employee to ensure the safety of all persons using the work premises. This includes the self employed.

The Management of Health & Safety at Work Regulations 1999 states:

"Every employer shall make suitable and sufficient assessment of:

  • (a) the risks to the health and safety of his employees to which they are exposed whilst at work, and

  • (b) the risks to ensure the health and safety of persons not in his employment arising out of or in connection with the conduct by him or his undertaking."

The Provision and Use of Work Equipment Regulations 1998 states:

"Every employer shall ensure that work equipment is maintained in an efficient state, in efficient working order and in good repair."

The PUWER 1998 covers most risks that can result from using work equipment. With respect to risks from electricity, compliance with the Electricity at Work Regulations 1989 is likely to achieve compliance with the PUWER 1998.

PUWER 1998 only applies to work equipment used by workers at work. This includes all work equipment (fixed, transportable or portable) connected to a source of electrical energy. PUWER does not apply to fixed installations in a building. The electrical safety of these installations is dealt with only by the Electricity at Work Regulations.

The Electricity at Work Regulations 1989 states:

"All systems shall at all times be of such construction as to prevent, so far as reasonably practicable, such danger."

"As may be necessary to prevent danger, all systems shall be maintained so as to prevent, so far as reasonably practicable, such danger."

"'System' means an electrical system in which all the electrical equipment is, or may be, electrically connected to a common source of electrical energy and includes such source and such equipment"

"'Electrical Equipment' includes anything used, intended to be used or installed for use, to generate, provide, transmit, transform, rectify, convert, conduct, distribute, control, store, measure or use electrical energy."

Scope of the legislation

It is clear that the combination of the HSW Act 1974, the PUWER 1998 and the EAW Regulations 1989 apply to all electrical equipment used in, or associated with, places of work. The scope extends from distribution systems down to the smallest piece of electrical equipment.

It is clear that there is a requirement to inspect and test all types of electrical equipment in all work situations.

Pat testing or portable appliance testing is an important part of any health & safety policy. This site is intended as a guide to both the legal implications and to the technical requirements.

The Health & Safety Executive states that 25% of all reportable electrical accidents involve portable appliances. The Electricity at Work Regulations place a legal responsibility on employers, employees and self-employed persons to comply with the provisions of the regulations and take reasonably practicable steps to ensure that no danger results from the use of such equipment. This in effect requires the implementation of a systematic and regular program of maintenance, inspection and testing. The Health & Safety at Work Act (1974) places such an obligation in the following circumstances:

  • 1. Where appliances are used by employees.
  • 2. Where the public may use appliances in establishments such as hospitals, schools, hotels, shops etc.
  • 3. Where appliances are supplied or hired.
  • 4. Where appliances are repaired or serviced.

The level of inspection and testing required is dependant upon the risk of the appliance becoming faulty, which is in turn dependant upon the type of appliance, the nature of its use and the environment in which it is used.

The Institution of Electrical Engineers publish the "Code of Practice for In-service Inspection and Testing of Electrical Equipment" (ISBN: 978-0-86341-833-4) . This guide forms the basis for portable appliance testing in the U.K.

 

TAS can provide all types of PAT Testing in Manchester

 

PAT Testing